Outlining a multidimensional approach for the analysis of coffee using HPLC

This study investigated approaches for the profiling of coffee using two multidimensional approaches: (1) a multi-detection process and (2) a multi-separation process employing HPLC. The first approach compared multidetection techniques of conventional High Performance Liquid Chromatography (HPLC) hyphenated with a detector (DPPH•, UV-Vis and MS), and multiplexed mode via HPLC with an Active Flow Technology (AFT) column in Parallel Segmented Flow (PSF) format with DPPH• detection, UV-Vis and MS running simultaneously. Multiplexed HPLCPSF enabled the determination of key chemical entities by reducing the data complexity of the sample whilst obtaining a greater degree of molecule-specific information within a fraction of the time it takes using conventional multi-detection processes. DPPH•, UV-Vis and MS (TIC) were multiplexed for the analysis of espresso coffee and decaffeinated espresso coffee. Up to 20 DPPH• peaks were detected for each sample, and with direct retention time peak matching, 70% of DPPH• peaks gave a UV-Vis response for the espresso coffee and 95% for the decaffeinated espresso coffee. The second approach involved the use of a two-dimensional (2D) HPLC system to expand the separation space and separation power for the analysis of coffee, focusing on the resolution and detection of coeluting and overlapping peaks, which was beyond the limits of conventional HPLC in resolving complex samples. The 2DHPLC analysis resulted with the detection of 176 peaks and a closer observation showed the presence of an additional 17 peaks in a cut section where in 1D mode only one peak was observed.

Empirical investigation of multi-tier ensembles for the detection of cardiac autonomic neuropathy using subsets of the Ewing Features

This article is devoted to an empirical investigation of per- formance of several new large multi-tier ensembles for the detection of cardiac autonomic neuropathy (CAN) in diabetes patients using subsets of the Ewing features. We used new data collected by the diabetes screening research initiative (DiScRi) project, which is more than ten times larger than the data set originally used by Ewing in the investigation of CAN. The results show that new multi-tier ensembles achieved better performance compared with the outcomes published in the literature previously. The best accuracy 97.74% of the detection of CAN has been achieved by the novel multi-tier combination of AdaBoost and Bagging, where AdaBoost is used at the top tier and Bagging is used at the middle tier, for the set consisting of the following four Ewing features: the deep breathing heart rate change, the Valsalva manoeuvre heart rate change, the hand grip blood pressure change and the lying to standing blood pressure change.

AMDD : Exploring entropy based anonymous multi-dimensional data detection for network optimization in human associated DTNs

Human associated delay-tolerant networks (HDTNs) are new networks where mobile devices are associated with humans and demonstrate social-related communication characteristics. Most of recent works use real social trace file to analyse its social characteristics, however social-related data is sensitive and has concern of privacy issues. In this paper, we propose an anonymous method that anonymize the original data by coding to preserve individual's privacy. The Shannon entropy is applied to the anonymous data to keep rich useful social characteristics for network optimization, e.g. routing optimization. We use an existing MIT reality dataset and Infocom 06 dataset, which are human associated mobile network trace files, to simulate our method. The results of our simulations show that this method can make data anonymously while achieving network optimization.

A multi-tier ensemble construction of classifiers for phishing email detection and filtering

This paper is devoted to multi-tier ensemble classifiers for the detection and filtering of phishing emails. We introduce a new construction of ensemble classifiers, based on the well known and productive multi-tier approach. Our experiments evaluate their performance for the detection and filtering of phishing emails. The multi-tier constructions are well known and have been used to design effective classifiers for email classification and other applications previously. We investigate new multi-tier ensemble classifiers, where diverse ensemble methods are combined in a unified system by incorporating different ensembles at a lower tier as an integral part of another ensemble at the top tier. Our novel contribution is to investigate the possibility and effectiveness of combining diverse ensemble methods into one large multi-tier ensemble for the example of detection and filtering of phishing emails. Our study handled a few essential ensemble methods and more recent approaches incorporated into a combined multi-tier ensemble classifier. The results show that new large multi-tier ensemble classifiers achieved better performance compared with the outcomes of the base classifiers and ensemble classifiers incorporated in the multi-tier system. This demonstrates that the new method of combining diverse ensembles into one unified multi-tier ensemble can be applied to increase the performance of classifiers if diverse ensembles are incorporated in the system.

Multi-modal abnormality detection in video with unknown data segmentation

This paper examines a new problem in large scale stream data: abnormality detection which is localized to a data segmentation process. Unlike traditional abnormality detection methods which typically build one unified model across data stream, we propose that building multiple detection models focused on different coherent sections of the video stream would result in better detection performance. One key challenge is to segment the data into coherent sections as the number of segments is not known in advance and can vary greatly across cameras; and a principled way approach is required. To this end, we first employ the recently proposed infinite HMM and collapsed Gibbs inference to automatically infer data segmentation followed by constructing abnormality detection models which are localized to each segmentation. We demonstrate the superior performance of the proposed framework in a real-world surveillance camera data over 14 days.

Malware detection and prevention system based on multi-stage rules

The continuously rising Internet attacks pose severe challenges to develop an effective Intrusion Detection System (IDS) to detect known and unknown malicious attack. In order to address the problem of detecting known, unknown attacks and identify an attack grouped, the authors provide a new multi stage rules for detecting anomalies in multi-stage rules. The authors used the RIPPER for rule generation, which is capable to create rule sets more quickly and can determine the attack types with smaller numbers of rules. These rules would be efficient to apply for Signature Intrusion Detection System (SIDS) and Anomaly Intrusion Detection System (AIDS).

Fault detection in a cold forging process through feature extraction with a neural network

This paper investigates the application of neural networks to the recognition of lubrication defects typical to an industrial cold forging process employed by fastener manufacturers. The accurate recognition of lubrication errors, such as coating not being applied properly or damaged during material handling, is very important to the quality of the final product in fastener manufacture. Lubrication errors lead to increased forging loads and premature tool failure, as well as to increased defect sorting and the re-processing of the coated rod. The lubrication coating provides a barrier between the work material and the die during the drawing operation; moreover it needs be sufficiently robust to remain on the wire during the transfer to the cold forging operation. In the cold forging operation the wire undergoes multi-stage deformation without the application of any additional lubrication. Four types of lubrication errors, typical to production of fasteners, were introduced to a set of sample rods, which were subsequently drawn under laboratory conditions. The drawing force was measured, from which a limited set of features was extracted. The neural network based model learned from these features is able to recognize all types of lubrication errors to a high accuracy. The overall accuracy of the neural network model is around 98% with almost uniform distribution of errors between all four errors and the normal condition.

Content-based video indexing for sports applications using integrated multi-modal approach

To sustain an ongoing rapid growth of video information, there is an emerging demand for a sophisticated content-based video indexing system. However, current video indexing solutions are still immature and lack of any standard. This doctoral consists of a research work based on an integrated multi-modal approach for sports video indexing and retrieval. By combining specific features extractable from multiple audio-visual modalities, generic structure and specific events can be detected and classified. During browsing and retrieval, users will benefit from the integration of high-level semantic and some descriptive mid-level features such as whistle and close-up view of player(s).

Fast scene change detection based histogram

This work presents a new approach to detecting the scene change in the successive capture of photographs of a place within equal time interval. This method is based on a gray level histogram of every image. In this method the histogram of an image is processed to modify it for matching with the processed histogram of a reference image. The coefficient of correlation is taken as the measure of matching. As the method does not do any heavy signal processing, and the images are taken successively with a multi-shot digital still camera, it can be applied for real-time processing of such pictures for detection of a scene change. A multi-camera in multi-position approach is also shown to evaluate the change in scene simultaneously from different angles. Both multi-camera and single-camera approaches are compared in detecting a scene change.

Depth estimation using multi-wavelet analysis based stereo vision approach

The problem of dimensional defects in aluminum die- casting is widespread throughout the foundry industry and their detection is of paramount importance in maintaining product quality. Due to the unpredictable factory environment and metallic, with highly reflective, nature of aluminum die-castings, it is extremely hard to estimate true dimensionality of the die-casting, autonomously. In this work, we propose a novel robust 3D reconstruction algorithm capable of reconstructing dimensionally accurate 3D depth models of the aluminum die-castings. The developed system is very simple and cost effective as it consists of only a stereo cameras pair and a simple fluorescent light. The developed system is capable of estimating surface depths within the tolerance of 1.5 mm. Moreover, the system is invariant to illuminative variations and orientation of the objects in the input image space, which makes the developed system highly robust. Due to its hardware simplicity and robustness, it can be implemented in different factory environments without a significant change in the setup.

Detection and classification of road signs in natural environments

An automatic road sign recognition system first locates road signs within images captured by an imaging sensor on-board of a vehicle, and then identifies the detected road signs. This paper presents an automatic neural-network-based road sign recognition system. First, a study of the existing road sign recognition research is presented. In this study, the issues associated with automatic road sign recognition are described, the existing methods developed to tackle the road sign recognition problem are reviewed, and a comparison of the features of these methods is given. Second, the developed road sign recognition system is described. The system is capable of analysing live colour road scene images, detecting multiple road signs within each image, and classifying the type of road signs detected. The system consists of two modules: detection and classification. The detection module segments the input image in the hue-saturation-intensity colour space, and then detects road signs using a Multi-layer Perceptron neural-network. The classification module determines the type of detected road signs using a series of one to one architectural Multi-layer Perceptron neural networks. Two sets of classifiers are trained using the Resillient-Backpropagation and Scaled-Conjugate-Gradient algorithms. The two modules of the system are evaluated individually first. Then the system is tested as a whole. The experimental results demonstrate that the system is capable of achieving an average recognition hit-rate of 95.96% using the scaled-conjugate-gradient trained classifiers.

Detection of vehicles with monolithic classifier vis-à-vis a boosted cascaded classifier

This paper describes the comparison of accuracy and performance of two machine learning approaches for visual object detection and tracking vehicles, from an on-road image sequence. The first is a neural network based approach. Where an algorithm of multi resolution technique based on Haar basis functions was used to obtain an image with different scales. Thereafter a classification was carried out with the multilayer feed forward neural network. Principle Component Analysis (PCA) technique was used as a dimension reduction technique to make the classification process much more efficient. The second approach is based on boosting which also yields very good detection rates. In general, boosting is one of the most important developments in classification methodology. It works by sequentially applying a classification algorithm to reweighed versions of the training data, followed by taking a weighted majority vote of the sequence of classifiers thus produced. For this work, a strong classifier was trained by the adaboost algorithm. The results of comparing the two methodologies visà-vis shows the effectiveness of the methods that have been used.